Manufacturer Communications
Vehicles / Allison / H 50 ep transmission / 9999
| Bulletin Number | Vehicle Make | Vehicle Model | Model Year | Summary |
|---|---|---|---|---|
| SIL 05-EP-20EN R | ALLISON | H 50 EP TRANSMISSION | 9999 | Instruction to service channel to familiarize themselves with safe electrical work practices when working on the high voltage electrical system of the |
| SIL 19-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Service letter regarding servicing the DPIM, gaskets, and screw torques<br /> |
| TT7235EN | ALLISON | H 50 EP TRANSMISSION | 9999 | Tech tip related to engine calibration triggering DTC 65-25<br /> |
| ST 1898 Rev B | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Tip regarding Water and/or Ethylene Glycol in Transmission Fluid. The analysis of the fluid sample (by the fluid supplier or any qualified lab |
| ST 1707 Rev C | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Tip regarding Troubleshooting Techniques for Low Power Complaints with Cummins ISB/ISL Engine<br /> |
| 2011FA07 v2 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle.<br /> |
| 2014FA12 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer service campaign to recalibrate software to adjust torsional torque to reduce engine induced reversing torque.<br /> |
| 2012FA03 Rev D | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2012FA03 Rev B | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2012FA03 Rev A | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2012FA03 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2011FA07 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle on the 401 Pre-4th Generation H 40/50 EPTM equipped busses<br /> |
| 2011FA06 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle.<br /> |
| 2011FA06-2 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle.<br /> |
| 2012FA03 Rev C | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces program to remove and replace some Dual Power Inverter Modules (DPIM2) with part ordering instructions.<br /> |
| SIL 22-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service information announcing the availability of a service kit for the DPIM2 current sensor and replacement procedure<br /> |
| SIL 19-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service information regarding avoiding water intrusion during service of the DPIM<br /> |
| SIL 02-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the Bias-Control Assembly (BCA) Card and procedure for replacing it in the DPIM2<br /> |
| 2015FA12 Rev B | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to installs a new SID that disables the motor speed sensor diagnostic check during shutdown<br /> |
| SIL 09-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter regarding Energy Storage System 3 (ESS 3) Release Notification<br /> |
| ST 1707 Rev C | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Tip regarding Troubleshooting Techniques for Low Power Complaints with Cummins ISB/ISL Engine<br /> |
| 2011FA07 v2 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle.<br /> |
| 2014FA12 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer service campaign to recalibrate software to adjust torsional torque to reduce engine induced reversing torque.<br /> |
| 2012FA03 Rev D | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2012FA03 Rev B | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2012FA03 Rev A | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2012FA03 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2011FA07 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle on the 401 Pre-4th Generation H 40/50 EPTM equipped busses<br /> |
| 2011FA06 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle.<br /> |
| 2011FA06-2 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle.<br /> |
| 2012FA03 Rev C | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces program to remove and replace some Dual Power Inverter Modules (DPIM2) with part ordering instructions.<br /> |
| SIL 22-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service information announcing the availability of a service kit for the DPIM2 current sensor and replacement procedure<br /> |
| SIL 19-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service information regarding avoiding water intrusion during service of the DPIM<br /> |
| SIL 02-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the Bias-Control Assembly (BCA) Card and procedure for replacing it in the DPIM2<br /> |
| 2015FA12 Rev B | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to installs a new SID that disables the motor speed sensor diagnostic check during shutdown<br /> |
| SIL 09-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter regarding Energy Storage System 3 (ESS 3) Release Notification<br /> |
| 2015FA12 Rev A | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to install a new SID that disables the motor speed sensor diagnostic check during shutdown<br /> |
| SIL 27-EP-15 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter to explain using Amprobe Ohm Megger (Model AMB45)for Troubleshooting<br /> |
| SIL 01-EP-15 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the SKiM module and GATE drive card inside the DPIM2 and procedure for replacement<br /> |
| SIL 21-EP-13 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces kits to repair AC and DC lug box covers on the Dual Power Inverter Module (DPIM) where the screws seized or broke during removal<br /> |
| SIL 10-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service information explaining that the trim valve spring can be incorrectly mix with the exhaust-backfill spring and announces color-coded exhaust-ba |
| SIL 10-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces change to the color of the exhaust backfill spring to distinguish it from similar springs used in the H 40/50 EP assembly plant<br /> |
| SIL 5-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability the direct current (DC) Busbar Assembly and DC Terminal Block Inside the DPIM<br /> |
| SIL 3-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability the alternating current (AC) Busbar Assembly and AC Terminal Block Inside the Dual Power Inverter Module 2 (DPIM2)<br /> |
| 2012FA03 Rev D | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2012FA03 Rev B | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2012FA03 Rev A | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2012FA03 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to remove and replace some Dual Power Inverter Modules (DPIM2), with part ordering instructions.<br /> |
| 2011FA07 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle on the 401 Pre-4th Generation H 40/50 EPTM equipped busses<br /> |
| 2011FA06 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle.<br /> |
| SIL 29-EP-15 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter containing replacement pages for the H 40/50 EP TS5812EN 2014 Troubleshooting Manual<br /> |
| SIL 27-EP-15 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter to explain using Amprobe Ohm Megger (Model AMB45)for Troubleshooting<br /> |
| 2015FA12 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to installs a new SID that disables the motor speed sensor diagnostic check during shutdown<br /> |
| SIL 4-EP-15 | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the Passive Discharge Resistor (P/N 2954937 and related components) and includes the procedure to replace the Passive Di |
| TT7235EN | ALLISON | H 50 EP TRANSMISSION | 9999 | Tech tip related to engine calibration triggering DTC 65-25<br /> |
| ST 1099 Rev R | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Tip regarding Transmission Fluid/Filter Change Recommendations<br /> |
| ST 1898 Rev B | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Tip regarding Water and/or Ethylene Glycol in Transmission Fluid. The analysis of the fluid sample (by the fluid supplier or any qualified lab |
| ST 1707 Rev C | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Tip regarding Troubleshooting Techniques for Low Power Complaints with Cummins ISB/ISL Engine<br /> |
| 2011FA07 v2 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle.<br /> |
| 2014FA12 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer service campaign to recalibrate software to adjust torsional torque to reduce engine induced reversing torque.<br /> |
| SIL 22-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service information announcing the availability of a service kit for the DPIM2 current sensor and replacement procedure<br /> |
| SIL 19-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service information regarding avoiding water intrusion during service of the DPIM<br /> |
| SIL 02-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the Bias-Control Assembly (BCA) Card and procedure for replacing it in the DPIM2<br /> |
| 2015FA12 Rev B | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to installs a new SID that disables the motor speed sensor diagnostic check during shutdown<br /> |
| SIL 09-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter regarding Energy Storage System 3 (ESS 3) Release Notification<br /> |
| 2015FA12 Rev A | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to installs a new SID that disables the motor speed sensor diagnostic check during shutdown<br /> |
| SIL 27-EP-15 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter to explain using Amprobe Ohm Megger (Model AMB45)for Troubleshooting<br /> |
| SIL 01-EP-15 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the SKiM module and GATE drive card inside the DPIM2 and procedure for replacement<br /> |
| SIL 21-EP-13 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces kits to repair AC and DC lug box covers on the Dual Power Inverter Module (DPIM) where the screws seized or broke during removal<br /> |
| SIL 10-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service information explaining that the trim valve spring can be incorrectly mix with the exhaust-backfill spring and announces color-coded exhaust-ba |
| SIL 10-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces change to the color of the exhaust backfill spring to distinguish it from similar springs used in the H 40/50 EP assembly plant<br /> |
| SIL 5-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability the direct current (DC) Busbar Assembly and DC Terminal Block Inside the DPIM<br /> |
| SIL 3-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability the alternating current (AC) Busbar Assembly and AC Terminal Block Inside the Dual Power Inverter Module 2 (DPIM2)<br /> |
| SIL 29-EP-15 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter containing replacement pages for the H 40/50 EP TS5812EN 2014 Troubleshooting Manual<br /> |
| SIL 27-EP-15 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter to explain using Amprobe Ohm Megger (Model AMB45)for Troubleshooting<br /> |
| 2015FA12 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to installs a new SID that disables the motor speed sensor diagnostic check during shutdown<br /> |
| SIL 4-EP-15 | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the Passive Discharge Resistor (P/N 2954937 and related components) and includes the procedure to replace the Passive Di |
| 2011FA06-2 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer campaign related to suction filter angle.<br /> |
| 2012FA03 Rev C | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces program to remove and replace some Dual Power Inverter Modules (DPIM2) with part ordering instructions.<br /> |
| 2015FA12 Rev A | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to installs a new SID that disables the motor speed sensor diagnostic check during shutdown<br /> |
| SIL 27-EP-15 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter to explain using Amprobe Ohm Megger (Model AMB45)for Troubleshooting<br /> |
| SIL 01-EP-15 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the SKiM module and GATE drive card inside the DPIM2 and procedure for replacement<br /> |
| SIL 21-EP-13 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces kits to repair AC and DC lug box covers on the Dual Power Inverter Module (DPIM) where the screws seized or broke during removal<br /> |
| SIL 10-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service information explaining that the trim valve spring can be incorrectly mix with the exhaust-backfill spring and announces color-coded exhaust-ba |
| SIL 10-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces change to the color of the exhaust backfill spring to distinguish it from similar springs used in the H 40/50 EP assembly plant<br /> |
| SIL 5-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability the direct current (DC) Busbar Assembly and DC Terminal Block Inside the DPIM<br /> |
| SIL 3-EP-16 | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability the alternating current (AC) Busbar Assembly and AC Terminal Block Inside the Dual Power Inverter Module 2 (DPIM2)<br /> |
| SIL 29-EP-15 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter containing replacement pages for the H 40/50 EP TS5812EN 2014 Troubleshooting Manual<br /> |
| SIL 27-EP-15 | ALLISON | H 50 EP TRANSMISSION | 9999 | Service Information Letter to explain using Amprobe Ohm Megger (Model AMB45)for Troubleshooting<br /> |
| 2015FA12 | ALLISON | H 50 EP TRANSMISSION | 9999 | Customer satisfaction campaign to installs a new SID that disables the motor speed sensor diagnostic check during shutdown<br /> |
| SIL 4-EP-15 | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the Passive Discharge Resistor (P/N 2954937 and related components) and includes the procedure to replace the Passive Di |
| TT7235EN | ALLISON | H 50 EP TRANSMISSION | 9999 | Tech tip related to engine calibration triggering DTC 65-25<br /> |
| SIL 12-EP-14 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Provides instructions for replacing current sensors inside the DPIM2<br /> |
| SIL 5-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces availability of the DC busbar, DC terminal block, HVIL support and related components and service instructions to allow repairs to the dual |
| SIL 4-EP-15 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the passive discharge resistor as a service part. The communications also contains instructions for replacing the passiv |
| SIL 3-EP-17 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces availability of parts that can be used for servicing the DPIM2 and service instructions<br /> |
| SIL 3-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Replacing the AC Busbar Assembly and AC Terminal Block Inside the Dual Power Inverter Module 2 (DPIM2)<br /> |
| SIL 3-EP-14 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the high voltage interlock loop circuit card and instructions for replacing it.<br /> |
| SIL 2-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of the Bias-Control Assembly (BCA) Card and procedure for replacing it in the DPIM2<br /> |
| SIL 1-EP-15 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Service letter announcing the availability of kits to replace components of the Dual Power Inverter Module 2 (DPIM2) and eliminating the need to repla |
| SIL 3-EP-17 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Announces the availability of internal components for the DPIM2 and procedures for replacement.<br /> |
| SIL 35-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Information related to replacing the signal interface card and encoder cards inside the DPIM2<br /> |
| SIL 22-EP-16 Rev | ALLISON | H 50 EP TRANSMISSION | 9999 | Provides information related to replacing Current Sensors Inside the Dual Power Inverter Module 2 (DPIM2)<br /> |
Subscribe for our latest newslatters
Know if there is a safety problem with your vehicles, tires or car seat, and how to get it fixed.