| Bulletin Number | Vehicle Make | Vehicle Model | Model Year | Summary |
|---|---|---|---|---|
| PI-0849 | MACK | CHU | 2014 | MACK TRUCK: SOME TRUCKS HAD FRONT AXLE U-BOLT WEDGES INCORRECTLY INSTALLED AND IT CAUSES U-BOLTS TO BEND ON FRONT AXLE AND THE U-BOLTS AND NUTS NEED |
| PI-0850 | MACK | CHU | 2014 | MACK TRUCK: DUE TO AN INCORRECT INSTALLATION OF FRONT AXLE U BOLT WEDGE, CAUSED THE U-BOLTS TO BEND WOULD NEED REPLACEMENT OF THE U-BOLTS AND NUTS. M |
| FSB-813-001 | MACK | CHU | 2014 | MACK: INFORMATION PROVIDED ON CERTAIN TRUCKS IN REGARDS TO B PILLAR CRACKS FORMING AT UPPER EXHAUST MOUNTING AND A NEW DEVELOPMENT REINFORCEMENT THAT |
| 364-038 | MACK | CHU | 2014 | MACK : "FIFTH WHEEL SLIDE FAULT" MESSAGE DISPLAYING WHEN VEHICLE CUTS OFF. THIS MAY BE CAUSED BY PARAMETER PROGRAMMING ISSUE. *LJ<br /> |
| 371-040 | MACK | CHU | 2014 | MACK TRUCKS: SERVICE BULLETIN : DEFECT WITH THE ABS SENSOR CONNECTOR, WHICH MAY CAUSE CORROSION. AFTERMARKET JUMPER HARNESS REQUIRED TO REPAIR (PART |
| PI0861 | MACK | CHU | 2014 | SUMMARY TO BE PROVIDED ON A FUTURE DATE.<br /> |
| 386-846 | MACK | CHU | 2014 | MACK TRUCKS: 2013-2014 FUEL MANAGEMENT GAUGE, REPLACEMENT IS REQUIRED FOR THE FOLLOWING MODELS DUE TO FUEL GAUGE SENSOR NOT PROPERLY WORKING. *LJ<b |
| 432-014 | MACK | CHU | 2014 | MACK TRUCKS: THE CURRENT HARDWARE FOR M- DRIVE TRANSMISSION ARE ALSO USED IN THE US2010 EMISSIONS AND NEWER VEHICLES IN NORTH AMERICA ARE THE SAME PA |
| 371-048 | MACK | CHU | 2014 | MACK TRUCKS: 2007-2014: INSULATION KIT IS RECOMMENDED TO PROTECT CHAFING OF THE CAB WIRING HARNESS IN THE COLUMN BRACKET. *LJ<br /> |
| 364-037 | MACK | CHU | 2014 | MACK TRUCKS: MODELS 2010-2014: THERE WILL BE NO WARNING LIGHT WHEN VECU GET SHORTED TO GND. WHICH WILL CAUSE SLIDING OF THE 5TH WHEEL WHEN NO SWIT |
| 371-040 | MACK | CHU | 2014 | MACK TRUCKS: 2013-2014 SIGNS OF CORROSION ARE SHOWING FROM THE ANTI-LOCK BRAKE SYSTEM SENSOR CONNECTOR WHICH NEEDS REPLACEMENT. CORROSION OF THE |
| 214-019 | MACK | CHU | 2014 | MACK TRUCKS: REPLACEMENT OF EXHAUST BRAKE ROCKER ARMS ARE REQUIRED ON VEHICLES BUILT BETWEEN 09/03/2014 AND 10/27/2014. *LJ<br /> |
| 237-019 | MACK | CHU | 2014 | MACK TRUCKS: NEW STRATEGIES HAVE BEEN RECOMMENDED TO IMPROVE INJECTOR REPAIRS. TECHNICIANS WILL FOLLOW THE NECESSARY GUIDELINES FOR THE PROCEDURE. |
| 386-007 | MACK | CHU | 2014 | MACK TRUCKS: 2012-2014: SENSOR DEFECT WHICH CAUSES VEHICLE SPEED SENSOR TO FAIL INTERNALLY. *LJ<br /> |
| 851-009 | MACK | CHU | 2014 | MACK TRUCKS: REPAIR PEEP WINDOW MOLDING THAT IS CAUSING SEPERATION FROM HINGES AND CAUSING FALLING FROM THE DOOR. *LJ<br /> |
Subscribe for our latest newslatters
Know if there is a safety problem with your vehicles, tires or car seat, and how to get it fixed.