| Bulletin Number | Vehicle Make | Vehicle Model | Model Year | Summary |
|---|---|---|---|---|
| CSP05d | MAZDA | MAZDA6 | 2018 | MULTI-MODEL - MAZDA MOBILE START CUSTOMER SATISFACTION PROGRAM (CSP05). As shared previously, due to planned industry-wide changes in mobile network i |
| 05-005-20-3752 | MAZDA | MAZDA6 | 2018 | Some customers may complain of a whining noise from the automatic transaxle when driving at 10 mph and above. The noise: ï¿· Depend |
| 01-002-20-3678 | MAZDA | MAZDA6 | 2018 | Some vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored in memory after engine start and room fuse 15A (A) removed.&ium |
| 01-014-19-3618 | MAZDA | MAZDA6 | 2018 | Some customers may experience a check engine light illuminating with DTC P0012:00 stored in PCM memory. DTC P0012:00 - Electric variable valve timing |
| 15-002-19-3542a | MAZDA | MAZDA6 | 2018 | Some customers may experience a SBS/SCBS, LAS/LDWS and/or HBC warning light on. A system error message may also be found in the center display. DTC U3 |
| SA-041-18 | MAZDA | MAZDA6 | 2018 | If you receive a customer complain of lack of power, rough idle, engine noise with stored DTC's P0340:00, P0304:00, P3400:00, P349B:00, and/or P3498:0 |
| 01-003-19-3557 | MAZDA | MAZDA6 | 2018 | Some vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored inmemory after engine start and room fuse 15A (A) removed. P261 |
| 15-002-19-3542 | MAZDA | MAZDA6 | 2018 | Some customers may experience a SBS/SCBS, LAS/LDWS and/or HBC warning light on. A system error message may also be found in the center display. DTC U3 |
| SA-045-18 | MAZDA | MAZDA6 | 2018 | |
| 03-002-18-3505a | MAZDA | MAZDA6 | 2018 | Some vehicles may exhibit a squeak noise from the right front driveshaft at the transaxle when driving. This concern is likely to occur when driving a |
| 00-002-18-3463a | MAZDA | MAZDA6 | 2018 | |
| 15-002-18-3502 | MAZDA | MAZDA6 | 2018 | Some customers may complain about one or more warning lights ON when they start the vehicle during hot weather. The following DTC is stored in memory: |
| 09-020-18-3458a | MAZDA | MAZDA6 | 2018 | |
| 01-016-18-3522 | MAZDA | MAZDA6 | 2018 | On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, f |
| SA-025-18 | MAZDA | MAZDA6 | 2018 | |
| SA-024-18 | MAZDA | MAZDA6 | 2018 | Some customers may complain of a lack of power under heavy load without any warning lights or DTCs. This concern may be due to a loose or detached hoo |
| SA-023-18 | MAZDA | MAZDA6 | 2018 | Some vehicles may have DTC C1001:92 stored in memory. DTC C1001:92 sets as a past record for low visibility of the Forward Sensing Camera (FSC). It do |
| 09-025-18-3479 | MAZDA | MAZDA6 | 2018 | Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components requi |
| 09-023-18-3475 | MAZDA | MAZDA6 | 2018 | When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be m |
| 02-010-18-3477 | MAZDA | MAZDA6 | 2018 | |
| 01-013-18-3478 | MAZDA | MAZDA6 | 2018 | Some vehicles may exhibit the check engine light on with DTC P0456 stored in the PCM memory. P0456: EVAP system leak detected (very small leak)The con |
| 00-003-18-3480 | MAZDA | MAZDA6 | 2018 | Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lath |
| 03-002-18-3505 | MAZDA | MAZDA6 | 2018 | Some vehicles may exhibit a squeak noise from the right front driveshaft at the transaxle when driving. This concern is likely to occur when driving a |
| 01-015-18-3513 | MAZDA | MAZDA6 | 2018 | Some vehicles may experience a lack of power and the check engine light on with DTC P061B:00 stored in the PCM memory when engine cranking is interrup |
| CSP02 | MAZDA | MAZDA6 | 2018 | CSP02 - Apple CarPlay and Android Auto - Parts and Warranty Information. As previously communicated, Apple CarPlay? and Android Auto? will soon be ava |
| DRW13 | MAZDA | MAZDA6 | 2018 | Dealer Rework (DRW) 13 - Mazda Connect Navigation Concern. As you may know, DRW13 was launched in March of 2018. This notice is to advise all dealers |
| 01-005-18-3415 | MAZDA | MAZDA6 | 2018 | Some vehicles may experience a rough idle with the check engine light on and DTC P0015 / P0524 stored in memory. P0015:00 - Exhaust CMP timing over-re |
| 08-001-18-3457 | MAZDA | MAZDA6 | 2018 | This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.<br /> |
| 01-011-18-3456 | MAZDA | MAZDA6 | 2018 | The vehicles listed above are equipped with a push button start/stop ignition system. Unlike previous Mazdamodels, there is no key cylinder on the ste |
| 00-002-18-3463 | MAZDA | MAZDA6 | 2018 | In support of the new Mazda6 Signature model, Mazda will make available for loan on a "as-needed" basis, a Special Service Tool (SST) to allow for the |
| SA-021-18 | MAZDA | MAZDA6 | 2018 | MAZDA CONNECT SOFTWARE VERSION 59.00.545 AVAILABLE. An update to the MAZDA CONNECT system is now available for download from the Mazda Global Service |
| SA-012-18 | MAZDA | MAZDA6 | 2018 | Some 2018 vehicles built after January 1, 2018 and equipped with Navigation may exhibit one of these concerns after the user inputs an address: A scre |
| 07-002-18-3432 | MAZDA | MAZDA6 | 2018 | A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turn |
| 05-004-18-3466 | MAZDA | MAZDA6 | 2018 | Some vehicles may experience the check engine light and automatic transaxle warning light ON with one or more of these DTCs stored in the TCM memory ( |
| 04-003-18-3455 | MAZDA | MAZDA6 | 2018 | Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicle |
| 05-002-18-3454 | MAZDA | MAZDA6 | 2018 | The new SKYACTIV-DRIVE FW6A-EL AT uses "Automatic Transmission Fluid (ATF) Type: FZ". Only use"ATF-FZ" to fill or top off the fluid level. ATF-FZ is s |
| 09-021-18-3459 | MAZDA | MAZDA6 | 2018 | Some vehicles may experience stains appearing on the hood, roof and/or trunk of the vehicle. This concern is most likely to be found in a cold weather |
| 09-020-18-3458 | MAZDA | MAZDA6 | 2018 | |
| MT-001-18 | MAZDA | MAZDA6 | 2018 | When installing a navigation SD card, the center display may show error message "Invalid SD Card". This may be caused by: The navigation SD card lock |
| MT-021-17 | MAZDA | MAZDA6 | 2018 | Some vehicles may experience the Check Engine Light ON with DTC P0171 (Fuel Trim too Lean) and possibly DTCs P030X (Misfire). Vehicles having this con |
| 09-002-18-3410 | MAZDA | MAZDA6 | 2018 | After the installation of a new instrument cluster, the message "Fctry" or "Factory" is displayed instead ofthe odometer. This concern may also occur |
| SA-018-18 | MAZDA | MAZDA6 | 2018 | The 360 degree View Monitor System is new for i-ACTIVSENSE on the 2018 Mazda6 Signature. During PDI, make sure all 4 cameras (front (1), right side (2 |
| SA-017-18 | MAZDA | MAZDA6 | 2018 | Upgrade your PCs to IDS version 109.00 and 109.01 from the previous version. NOTE: You may see ?Selection not available? on IDS when a selecting ?Pro |
| SA-015-18 | MAZDA | MAZDA6 | 2018 | A tapping/rattling noise may be noticed from the valve train area. This condition usually occurs after the engine has been turned off at normal operat |
| SA-014-18 | MAZDA | MAZDA6 | 2018 | Some customers may complain about the following message displayed in the Multi-Information Display: In the following cases, the MRCC with Stop & G |
| SA-012-18 | MAZDA | MAZDA6 | 2018 | Some 2018 vehicles built after January 1, 2018 and equipped with Navigation may exhibit one of these concerns after the user inputs an address: A scre |
| DRW13 | MAZDA | MAZDA6 | 2018 | Dealer Rework (DRW) 13 ? Mazda Connect Navigation Concern 2018MY CX-5, CX-3, CX-9, Mazda6, Mazda 3 and MX-5: We write to inform you that certain vehic |
| RF-16-03R1 | MAZDA | MAZDA6 | 2018 | |
| MT-002-18 | MAZDA | MAZDA6 | 2018 | |
| SA-009-18 | MAZDA | MAZDA6 | 2018 | The navigation SD Card VIN-locks to a vehicle in the following conditions: 1. Vehicle odometer under 62 miles ? VIN-lock occurs with key ON for 3 minu |
| SA-008-18 | MAZDA | MAZDA6 | 2018 | Some customers may complain about the MAZDA CONNECT center display cracking (spider cracking). The cracks are internal and cannot be felt by touch. Th |
| SA-005-18 | MAZDA | MAZDA6 | 2018 | Some customers may complain about SIRIUSXM satellite radio does not show album art, artist biographies or station logos in the center display. This is |
| 01-008-18-3451 | MAZDA | MAZDA6 | 2018 | This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully char |
| 09-019-18-3450 | MAZDA | MAZDA6 | 2018 | This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals |
| 09-014-18-3443 | MAZDA | MAZDA6 | 2018 | When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage ( |
| 09-011-18-3448 | MAZDA | MAZDA6 | 2018 | Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new |
| MT-004-18 | MAZDA | MAZDA6 | 2018 | If you encounter any type of electrical concern (e.g, dead battery), interview the customer before proceeding with normal Workshop Manual diagnosis. A |
| MT-001-18 | MAZDA | MAZDA6 | 2018 | When installing a navigation SD card, the center display may show error message "Invalid SD Card".<br /> |
| 02-005-18-3444 | MAZDA | MAZDA6 | 2018 | Beginning with the CX-5, grip type front and rear stabilizer bushings have been incorporated for noise prevention purposes. If any type of grease or l |
| 00-001-18-3446 | MAZDA | MAZDA6 | 2018 | Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the sch |
| 09-015-18-3445 | MAZDA | MAZDA6 | 2018 | At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.<br /> |
| 09-010-18-3440 | MAZDA | MAZDA6 | 2018 | Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 59.00.504 or later). NOTE: For |
| 15-005-17-3358b | MAZDA | MAZDA6 | 2018 | Some customers may complain that the BSM indicator light on the outer mirror glass does not illuminate when: ? Customer vehicle (A) is slowly passing |
| 15-005-17-3358a | MAZDA | MAZDA6 | 2018 | Some customers may complain that when passing a vehicle slowly, even if the vehicle is still in the alert area, the BSM indicator light on the outer m |
| 15-006-17-3388 | MAZDA | MAZDA6 | 2018 | Some customers may complain about one or more warning lights ON when they start the vehicle during hot weather. The following DTCs are stored in memor |
| 07-007-17-3384 | MAZDA | MAZDA6 | 2018 | Some customers may complain about poor heater performance even after the engine reaches normal operating temperature. This may be caused by a clogged |
| 01-008-17-3376 | MAZDA | MAZDA6 | 2018 | Some vehicles may experience a rough idle with the check engine light on and DTC P0015 / P0524 stored in memory. P0015:00 - Exhaust CMP timing over-re |
| SA-061-17 | MAZDA | MAZDA6 | 2018 |
Subscribe for our latest newslatters
Know if there is a safety problem with your vehicles, tires or car seat, and how to get it fixed.