Manufacturer Communications
Vehicles / International / Hv
Bulletin Number | Vehicle Make | Vehicle Model | Model Year | Summary |
---|---|---|---|---|
20510 | INTERNATIONAL | HV | 2021 | On certain trucks equipped with an automatic transmission, if the automatic transmission is still in drive or reverse position and the stationary PTO |
IK1400038 | INTERNATIONAL | HV | 2021 | Tridem Axle Oil Temperature Cluster Messages<br /> |
20114 | INTERNATIONAL | HV | 2021 | Certain International® HV and MV Series trucks, and DuraStar and WorkStar model trucks, the battery ground circuit interconnect cable may have bee |
IK1300186 | INTERNATIONAL | HV | 2021 | Auxiliary Transmission Diagnostics; only models with feature code 0013607 or 0013PNB controlled by DLB feature 0597268<br /> |
IK1600250 | INTERNATIONAL | HV | 2021 | Horizon Cab Door Field Replacement and the Side Window Air Deflectors. NOTE: This article will only be applicable to cabs with the deflector mounted o |
20508 | INTERNATIONAL | HV | 2021 | Certain MV and HV series trucks do not conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 108 relating to reflective tape missing on back of |
20106 | INTERNATIONAL | HV | 2021 | The upper fan ring shroud support bracket may have been assembled with an insufficient weld between the bracket and its mount which may cause the weld |
IK1600259 | INTERNATIONAL | HV | 2021 | Chrome Plated C-Loop Mirror Flat Glass Cracks<br /> |
20503 | INTERNATIONAL | HV | 2019 | The steer axle hubs may not have lubricant filled to the proper level at time of assembly which may result in wheel bearing damage and in extreme inst |
IK0800475 | INTERNATIONAL | HV | 2021 | Radio Diagnostics and Information<br /> |
19116 | INTERNATIONAL | HV | 2020 | The Remote Power Module (RPM) data link circuit may be pinned incorrectly, resulting in potential PTO operation issues.<br /> |
19114 | INTERNATIONAL | HV | 2020 | Torque Converter parameter setting may have been programmed incorrectly at time of manufacture. Only Heavy duty HV and all HX.<br /> |
19519 | INTERNATIONAL | HV | 2020 | The drive axle brake modulator valves may not meet the requirements for FMVSS 121 S5.3.4 Brake release time. Each service brake system shall meet the |
18519 | INTERNATIONAL | HV | 2018 | Under certain conditions, the Engine Control Module (ECM) calibration may not function properly and may result in a Diesel Particulate Filter (DPF) ov |
REC18514 | INTERNATIONAL | HV | 2018 | If a truck is operating with a trailer attached and the electrical connection is made between the truck and the trailer, the trailer brake lights in t |
19509 | INTERNATIONAL | HV | 2020 | The steer axle hubs may not have lubricant filled to the proper level at time of assembly which may result in wheel bearing damage and in extreme inst |
FSC18113 | INTERNATIONAL | HV | 2019 | Certain HV series trucks may have been built without the necessary hood position switch and harness for the Remote Start / Stop feature.<br /> |
FSC18111 | INTERNATIONAL | HV | 2018 | Trucks may have been built with incorrect huck bolt washers for the lift axle huck bolts resulting in loosened huck bolt fasteners<br /> |
Subscribe for our latest newslatters
Know if there is a safety problem with your vehicles, tires or car seat, and how to get it fixed.