Manufacturer Communications

Vehicles / International / Workstar
Bulletin Number Vehicle Make Vehicle Model Model Year Summary
IK1201442 INTERNATIONAL WORKSTAR 2015 5 gallon SSI DEF level sensor/ multifunction head unit retrofit; only 2014 and 2015 models year built with Navistar N9/N10 engines<br />
IK0900135 INTERNATIONAL WORKSTAR 2020 WorkStar Hybrid Mount to Pad Mount A/C Compressor Retrofit<br />
IK0900135 INTERNATIONAL WORKSTAR 2019 WorkStar Hybrid Mount to Pad Mount A/C Compressor Retrofit; only models with Cummins ISB 6.7 engine.<br />
IK0900135 INTERNATIONAL WORKSTAR 2020 WorkStar Hybrid Mount to Pad Mount A/C Compressor Retrofit; only models with Cummins ISB 6.7 engine<br />
MIN13103 INTERNATIONAL WORKSTAR 2013 The vehicles involved in this campaign were released from the plants with engines having an incorrect EPA emissions label.<br />
IK1300086 INTERNATIONAL WORKSTAR 2009 Bendix Stability Control -Customer Satisfaction Performance Improvement on specific Emergency/Tanker applications; Only models built From March 2009 t
IK0800224 INTERNATIONAL WORKSTAR 2020 Power Distribution Center (PDC) Replacement; 7000 (Workstar) Model Series with Allison or Manual Transmissions<br />
IK1200508 INTERNATIONAL WORKSTAR 2009 2007 EPA MaxxForce&reg; 11/13 - DTC 1628 Lambda Sensor Temp above Maximum; Only truck models with 2007 EPA MaxxForce 11 and 13 engines<br />
IK1900074 INTERNATIONAL WORKSTAR 2005 Wiper Troubleshooting<br />
IK1600022 INTERNATIONAL WORKSTAR 2005 New Door Weather Seal to Reduce Wind Noise and New Door Bumper; Door Seal - only Models Built Before May 24, 2004. Door bumper - models built at Garla
IK0800021 INTERNATIONAL WORKSTAR 2005 ESC Diagnostic Trouble Code (DTC) Index<br />
IK1201433 INTERNATIONAL WORKSTAR 2020 Only models built with Cummins X15; Fault Code 7125<br />
NPN INTERNATIONAL WORKSTAR 2020 DUAL STEERING GEAR AIR BLEED PROCEDURE<br />
IK1600131 INTERNATIONAL WORKSTAR 2020 Cab Water Leak Troubleshooting Tips; Excluding 9000i, PayStar(HX), CityStar, or LoadStar<br />
IK0800092 INTERNATIONAL WORKSTAR 2020 The First Check to make when Troubleshooting any Body Controller or ESC Issue<br />
IK0500059 INTERNATIONAL WORKSTAR 2020 Steering Noise in Vehicles Equipped with Dual Steer<br />
IK0800038 INTERNATIONAL WORKSTAR 2005 Park Lights Come Whenever the Key is On<br />
IK1201427 INTERNATIONAL WORKSTAR 2017 Incorrect Lubricating Oil Dipstick; Only models with Cummins SL9 engine, High Hood, and Non-AWD<br />
FSC18114 INTERNATIONAL WORKSTAR 2019 The suspect population may have been built with a left-side radiator stay rod of insufficient length, resulting in reduced radiator to fan clearance.<
IK1200101 INTERNATIONAL WORKSTAR 2018 Cummins Programming Guide and Cummins 285 Fault Code; Only pre-2007 models built with Cummins ISM Engine<br />
IK1300070 INTERNATIONAL WORKSTAR 2006 Transfer case troubleshooting; Only vehicles equipped with Transfer case<br />
IK0800565 INTERNATIONAL WORKSTAR 2017 Rework Instructions for Feature Code 0012VYL Accessory Wiring for Road Speed (salt spreader); only models built with Cummins ISL engine and feature 00
IK1201098 INTERNATIONAL WORKSTAR 2015 LT EGR Core Removal and Insertion on MaxxForce 11, 13, and N13 engines<br />
IK1600244 INTERNATIONAL WORKSTAR 2018 The two-piece engine cover used on some WorkStar models is susceptible to road debris and moisture intrusion at the floorboard<br />
IK1900256 INTERNATIONAL WORKSTAR 2018 A/C Compressor Radial mount failure; only models with Cummins ISB engine<br />
IK0800522 INTERNATIONAL WORKSTAR 2002 Repair Information for Damaged Headlight Connector<br />
IK0800521 INTERNATIONAL WORKSTAR 2002 Remote Power Module (RPM) Visual Inspection Guidelines<br />
IK0500057 INTERNATIONAL WORKSTAR 2017 All Heavy Platform Power Steering Fluid Production Change<br />
REC13516 INTERNATIONAL WORKSTAR 2013 Engine ECM recalibration prevent possible Diesel Particulate Filter (DPF) overload resulting in frequent exhaust system regeneration events.<br />
IK1900256 INTERNATIONAL WORKSTAR 2018 AC Compressor Radial mount failure; Only models equipped with Cummins ISB engine<br />
IK1200293 INTERNATIONAL WORKSTAR 2009 Snow Valve Light Staying ON and Motor Running Constantly<br />
AFC13917 INTERNATIONAL WORKSTAR 2009 Certain MaxxForce 13 engines may experience increase in engine RPM while idling (only while vehicle is parked or stopped).<br />
REC12528 INTERNATIONAL WORKSTAR 2012 The front passenger seat may not conform to Federal Motor Vehicle safety Standard No. 207; only vehicles intended for emergency use and equipped with
REC16514 INTERNATIONAL WORKSTAR 2017 Engine software On Board Diagnostic (OBD) issues will be corrected which will aid in engine malfunction identification and proper diagnosis.<br />
IK0900014 INTERNATIONAL WORKSTAR 2005 Front Spring Bolt Hitting Coolant Pipe on DuraStar and WorkStar Models built with feature 12WYK; only models built prior to 05/22/2007<br />
MIN14109 INTERNATIONAL WORKSTAR 2015 Front Steer Axle U-bolt Washer Replacement<br />
IK1300064 INTERNATIONAL WORKSTAR 2005 Manual Shift Lever Jumps Out of Gear; built during specific build dates noted in document<br />
IK1300038 INTERNATIONAL WORKSTAR 2005 Transmission Control Module Relocation; only with Allison WT Gen 3 Transmission<br />
IK1300014 INTERNATIONAL WORKSTAR 2005 Allison Transmission Not Pre-selecting with Engine/Exhaust Brake; Only with Allison Transmission<br />
IK0800476 INTERNATIONAL WORKSTAR 2009 Cracked Windshields on Units Equipped With Feature 595AMP - Heated Windshield<br />
IK1200058 INTERNATIONAL WORKSTAR 2005 Air Cleaner Snow Valve Replacement; Trucks with pre-2007 Emmissions Cummins Engines Only<br />
MIN16132 INTERNATIONAL WORKSTAR 2017 Evaporator to Compressor Hose, Condenser to Evaporator Hose, Compressor to Condenser Hose A/C hoses require replacement; Only certain models built at
MIN16125 INTERNATIONAL WORKSTAR 2017 Certain models may have been built without the necessary ground circuit for the emergency pump relay resulting in the pump to run at all times when th
IK0900122 INTERNATIONAL WORKSTAR 2018 Loose or Missing Charge Air Cooler Clamps and Possible DPF Plugging; only models Equipped with Cummins B6.7 engine<br />
IK0800476 INTERNATIONAL WORKSTAR 2009 Cracked Windshields on Units Equipped With Feature 595AMP - Heated Windshield<br />
IK0800352 INTERNATIONAL WORKSTAR 2004 Body Controller/ESC Software Updates<br />
IK0800037 INTERNATIONAL WORKSTAR 2011 Location of 1000 OHM Resistor In the HVAC Wiring<br />
IK0400152 INTERNATIONAL WORKSTAR 2018 Windshield Replacement on trucks equipped with Lane Departure Cameras; Only models with one of the following feature codes 008TTG, 0008TPU, 0008TTT, 0
MIN17113 INTERNATIONAL WORKSTAR 2017 The retaining nut securing the turbocharger oil supply line may not be tightened to its specified torque.<br />
IK1300162 INTERNATIONAL WORKSTAR 2017 Transmission Cooler Line Routing; Only models built Prior to November 29, 2017 with Cummins ISL engine<br />
IK1500068 INTERNATIONAL WORKSTAR 2010 Extended Cranking Time or Hard Start; only models equipped with D Shaped Fuel Tanks and Davco 382 Fuel Water Seperators<br />
IK0400058 INTERNATIONAL WORKSTAR 2005 General Air Brake Plumming Schematic<br />
IK0900121 INTERNATIONAL WORKSTAR 2017 HVAC line rub; only models equipped with Cummins ISB series engines and stationary grille feature code 009HBM<br />
IK0500059 INTERNATIONAL WORKSTAR 2019 Steering Noise in Vehicles Equipped with Dual Steer; Only models equipped with dual steering gear<br />
IK0800476 INTERNATIONAL WORKSTAR 2017 Cracked Windshields on Units Equipped With Feature 595AMP - Heated Windshield<br />
IK0800014 INTERNATIONAL WORKSTAR 2005 City Horn Blows When Driver Shuts off Truck and Walks Away; only equipped with with ESC or Body Controller<br />
IK1200293 INTERNATIONAL WORKSTAR 2009 Snow Valve Light Staying ON and Motor Running Constantly<br />
IK0800059 INTERNATIONAL WORKSTAR 2018 Brake Lights Staying On<br />
IK1500084 INTERNATIONAL WORKSTAR 2015 Applying Snow Valve Advanced Logic<br />
IK1200101 INTERNATIONAL WORKSTAR 2005 Cummins Programming Guide and Cummins 285 Fault Code<br />
REC15504 INTERNATIONAL WORKSTAR 2016 A diaphragm in the spring brake chamber may not be seated fully into the pressure plate and may cause internal leakage in the chamber, resulting in th
REC17509 INTERNATIONAL WORKSTAR 2018 Engine software update to improve engine and aftertreatment warm up strategies.<br />
IK1500093 INTERNATIONAL WORKSTAR 2018 Supplemental Fuel System Diagnostics - Racor Chassis Mounted Fuel Filter; only with Cummins L9 EPA 17 engine<br />
FSC17118 INTERNATIONAL WORKSTAR 2018 Certain DuraStar and WorkStar model trucks built with Cummins ISL engines and intended for stationary applications may not be equipped with the necess
MIN16138 INTERNATIONAL WORKSTAR 2017 The fan hub mounting bracket may be loose due to the mounting bolts being too long; only with Cummins ISL engines.<br />
IK1201324 INTERNATIONAL WORKSTAR 2017 2630-16 CACOT Under Cooling Faults; only on N13 WorkStar Plow Truck Application<br />
AFC15901 INTERNATIONAL WORKSTAR 2016 Vehicles equipped with an air intake snow valve may have incorrect programming in the body controller. This condition may cause the snow valve to rema
IK1201324 INTERNATIONAL WORKSTAR 2017 2630-16 CACOT Under Cooling Faults on N13 WorkStar Plow Truck Application<br />
REC14504 INTERNATIONAL WORKSTAR 2014 Truck models in this recall will require recalibration of the engine ECM that will enable the CARB engine idle feature.<br />
IK0800080 INTERNATIONAL WORKSTAR 2002 1939 Data Link Troubleshooting<br />
IK0500008 INTERNATIONAL WORKSTAR 2002 Lubrication to the Intermediate Steering Column Upper U-Joint<br />
AFC14902 INTERNATIONAL WORKSTAR 2015 A new calibration has been made available for emergency vehicles that prevents the possibility of engine derate or eventual shutdown due to the potent
REC15513 INTERNATIONAL WORKSTAR 2014
MIN15108 INTERNATIONAL WORKSTAR 2016 The radiator inlet hose may separate from the radiator inlet resulting in coolant loss and illuminating amber or red engine diagnostic lamps.<br />
IK1100005 INTERNATIONAL WORKSTAR 2002 Eaton Clutch Information<br />
IK1500080 INTERNATIONAL WORKSTAR 2009 Updated Snow Valve Motor and Harness Installation Procedure<br />
REC15503 INTERNATIONAL WORKSTAR 2015 Emergency vehicle calibration will reduce the engine exhaust soot levels that enter the aftertreatment system and prevent the possibility of engine de
MIN15104 INTERNATIONAL WORKSTAR 2015 Certain WorkStar vehicles may experience a condition where the lower CAC inlet hose clamp is rubbing against the hood when closed.<br />
REC15502 INTERNATIONAL WORKSTAR 2015 Recalibration of the Electronic Control Module (ECM). This will prevent the possibility of damage to an emissions system control sensor and improve ex
IK1500080 INTERNATIONAL WORKSTAR 2009 Updated Snow Valve Motor and Harness Installation Procedure<br />
IK0400125 INTERNATIONAL WORKSTAR 2009 Rear S Cam Tube / Bracket part update<br />
MIN16118 INTERNATIONAL WORKSTAR 2017 vehicles may have additional air brake fittings installed that are not required.<br />
IK0800092 INTERNATIONAL WORKSTAR 2002 The First Check to make when Troubleshooting any Body Controller or ESC Issue<br />
IK1500005 INTERNATIONAL WORKSTAR 2002 Dual Fuel Tank Transfer Pump System With Two Wire Pump Troubleshooting; equipped with feature 595192 built after 08/19/2002<br />
IK1500084 INTERNATIONAL WORKSTAR 2015 Applying Snow Valve Advanced Logic<br />
IK0100025 INTERNATIONAL WORKSTAR 2010 Block Heater Element Hitting the Front Crossmember<br />
IK1500084 INTERNATIONAL WORKSTAR 2015 Applying Snow Valve Advanced Logic<br />
IK1500080 INTERNATIONAL WORKSTAR 2009 Updated Snow Valve Motor and Harness Installation Procedure<br />
IK1600207 INTERNATIONAL WORKSTAR 2002 Wind noise at upper side door<br />
IK0800476 INTERNATIONAL WORKSTAR 2009 Cracked Windshields on Units Equipped With Feature 595AMP - Heated Windshield<br />
IK0800512 INTERNATIONAL WORKSTAR 2013 Upper radiator Hose update; equipped with feature 0012UAS<br />
MIN16114 INTERNATIONAL WORKSTAR 2017 Certain vehicles may have been built without the vent hose on 5 and 15 gallon Diesel Exhaust Fluid (DEF) tanks.<br />
IK0800521 INTERNATIONAL WORKSTAR 2002 Remote Power Module (RPM) Visual Inspection Guidelines<br />
IK0800224 INTERNATIONAL WORKSTAR 2002 Power Distribution Center (PDC) Replacement<br />
IK0800521 INTERNATIONAL WORKSTAR 2005 Remote Power Module (RPM) Visual Inspection Guidelines<br />
IK0800520 INTERNATIONAL WORKSTAR 2015 Ground Splice 6747 Causing Multiple Fault Codes<br />
IK0800517 INTERNATIONAL WORKSTAR 2015 Cummins ISB Engine Remote Engine Speed Control with Feature 12XAT<br />
IK0800414 INTERNATIONAL WORKSTAR 2005 Windows Stop Randomly or are Inoperative, Power Door Locks are inoperative<br />
MIN16104 INTERNATIONAL WORKSTAR 2017 Certain vehicles with Exempt Emissions Label.<br />
MIN16101 INTERNATIONAL WORKSTAR 2016 Flexplate bolts on certain models with N13 engines and Allison transmissions<br />
MIN16102 INTERNATIONAL WORKSTAR 2017 Certain 500K Baud compliant Body Control Module replacement<br />
IK1300149 INTERNATIONAL WORKSTAR 2014 ALLISON TRANSMISSION RATTLE WITH PTO<br />
MIN15110 INTERNATIONAL WORKSTAR 2016 Fan Shroud ring seal may be damaged by the fan during vehicle articulation<br />
MIN-11129 INTERNATIONAL WORKSTAR 2010 NAVISTAR: ENGINES MAY HAVE BEEN BUILT WITH A TWISTED FUEL LINE WHICH COULD RESULT IN PREMATURE WEAR-OUT OF THE LINE.*RM<br />
IK0400125 INTERNATIONAL WORKSTAR 2016 NAVISTAR: VARIOUS TYPES NAVISTAR VEHICLES WILL BE RECEIVING UPDATES ON THE REAR S CAM TUBE/ BRACKET PARTS. *TA UPDATED 9/10/15 *CN<br />
IK-1900136 INTERNATIONAL WORKSTAR 2011 NAVISTAR INT'L: DEVELOPED IN RESPONSE TO REPORTS OF INTERMITTENT OR INOPERABLE FRONT BLOWER MOTORS ON PROSTAR AND LONESTAR MODELS BUILT 12/10/07-12/0
REC14525 INTERNATIONAL WORKSTAR 2015 "CERTAIN WORKSTAR MODELS WITH FEATURE CODE 0508028 HEADLIGHTS IN BUMPER OPTION AND MANUFACTURED WITH HEAD LAMP HARNESS PART NUMBER 3898445C92; THE HE
REC14511 INTERNATIONAL WORKSTAR 2014 ENGINE PROGRAMMING WITH THE ENGINE SHUTDOWN FEATURE DISABLED MAY HAVE BEEN INSTALLED AT THE TIME OF BUILD EVEN THOUGH THE CUSTOMER ORDERED THE ENGINE
IK0800015 INTERNATIONAL WORKSTAR 2004 REMOTE POWER MODULE (RPM) TROUBLESHOOTING ON PRE-2007 MEDIUM DUTY TRUCKS<br />
MIN14120 INTERNATIONAL WORKSTAR 2015 INSPECT STARTER CABLE ROUTING; ONLY WITH N13 SCR ENGINES.<br />
15503 INTERNATIONAL WORKSTAR 2015 TSB CONTAINS AN OWNER'S NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. A POTENTIAL ENGINE DERATE OR SHUTDOWN HAS BEEN DETERMINED IN CERTA
VER-14512 INTERNATIONAL WORKSTAR 2014 NAVISTAR: IN CERTAIN TRUCKS, AN EMISSIONS RECALL IS REQUIRED TO RECALIBRATE ENGINE ECM SOFTWARE TO REDUCE INCORRECT FAULT CODES AND TO PREVENT OVERLO
IK0800227 INTERNATIONAL WORKSTAR 2009 ACCELERATOR POSITION SENSOR / IDLE VALIDATION SWITCH APS / IVS DIAGNOSTICS<br />
IK-0800229 INTERNATIONAL WORKSTAR 2010 NAVISTAR: ON CERTAIN TRUCKS, THE DOOR AND WINDOW LOCKS FAILS TO OPERATE PROPERLY. *PE UPDATED 5/9/12 *JS<br />
IK-0100016 INTERNATIONAL WORKSTAR 2010 NAVISTAR: HAVE ISSUES ON CERTAIN TRUCK CHASSIS WITH BENT OR SIDE SWAYED, BOWED FRAMES. THIS ISSUE WITH VEHICLES EQUIPPED WITH DOUBLE DOGBONE STYLE
IK-0500035 INTERNATIONAL WORKSTAR 2010 NAVISTAR: WHEN MAKING LEFT OR RIGHT TURN, TRUCK TURNS FURTHER TO THE RIGHT THAN IT DOES WHEN TURNING TO THE LEFT. *PE<br />
AFC-11925 INTERNATIONAL WORKSTAR 2010 NAVISTAR: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. RECALIBRATION OF ENGINE ECM FOR CERTAIN TRUCKS ARE REQUIRE FOR PREVENTION OF A DROP IN ENGI
IK-0800512 INTERNATIONAL WORKSTAR 2015 WORKSTAR UPPER RADIATOR HOSE UPDATE<br />
AFC-11931 INTERNATIONAL WORKSTAR 2013 NAVISTAR: HVAC FRONT INSIDE MODULE DRAIN REPAIR AND GREASE APPLICATION FOR EXHAUST GAS RECIRCULATION (EGR) VALVE. *KB<br />
AFC-11918 INTERNATIONAL WORKSTAR 2011 MILCOT BRAKE CHAMBER REPAIR. *KB<br />
AFC-11928 INTERNATIONAL WORKSTAR 2013 NAVISTAR: REPLACING THE HEATER SUPPLY PIPE. *KB<br />
AFCG-11907 INTERNATIONAL WORKSTAR 2010 NAVISTAR SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THE AUTOMATIC ENGINE SHUTDOWN FEATURE MAY NOT WORK CORRECTLY DUE TO A SOFTWARE
IK1600023 INTERNATIONAL WORKSTAR 2002 MIRROR REPAIR PROCEDURES AND REPLACEMENT PARTS AVAILABILITY<br />
AFC-G-11901 INTERNATIONAL WORKSTAR 2010 NAVISTAR: ON CERTAIN TRUCK MODELS, A FIELD CHANGE WILL BE PERFORM ON THE ENGINE SERPENTINE BELT TO PREVENT PREMATURE FAILURE BY INSTALLING A NEW BEL
15108 INTERNATIONAL WORKSTAR 2016 COOLANT LOSS AND ILLUMINATING AMBER RESULTING FROM RADIATOR INLET HOSE POSSIBLY SEPARATING FROM THE RADIATOR INLET *CN<br />
MIN-14120 INTERNATIONAL WORKSTAR 2015 NAVISTAR: INFORMATION PROVIDED REGARDING THE INSPECTION OF STARTER CABLE ROUTING ON SOME TRUCKS, WITH CERTAIN ENGINES. *PE<br />
TSI-10-16-06R INTERNATIONAL WORKSTAR 2011 NAVISTAR: SEAT BELTS INSTALLED ARE FROM A NEW SUPPLIER AND ARE NOT INTERCHANGEABLE WITH THE OLD ONES. *RM<br />
IK-1300086 INTERNATIONAL WORKSTAR 2010 INTERNATIONAL: THE STABILITY CONTROL HAS BEEN UPDATED FROM HIGH TO MEDIUM TUNING DUE TO UNWARRANTED STABILITY AT LOW SPEED TURNS. MODELS 2009-2011
IK0800478 INTERNATIONAL WORKSTAR 2016 NAVISTAR: SOME VEHICLES ARE EXPERIENCING HEADLIGHT CONDENSATION OR FROST IN THE VEHICLES. *TA<br />
IK1600202 INTERNATIONAL WORKSTAR 2002 COWL TRAY SEAL; ONLY BUILT PRIOR TO 11/11/2013<br />
IK-1400017 INTERNATIONAL WORKSTAR 2013 INTERNATIONAL: WHILE UNDER SEVERE DUTY APPLICATIONS, THE TRANSVERSE TORQUE ROD TOWER BRACKET COULD FAIL ON REAR AXLES. MODEL WORKSTAR. NO MODEL Y

Subscribe for our latest newslatters

Know if there is a safety problem with your vehicles, tires or car seat, and how to get it fixed.